IGUS MCI-10-01 5/8"" ID Double Flanged Sheet Metal Clip Bearing M250 for .040/.075 Sheet Metal
IGLIDE; CLIP BEARINGS ARE DESIGNED SPECIFICALLY FOR PUTTING SHAFTS THROUGH SHEET METAL PLATES. FOR THIS REASON THE BEARINGS HAVE FLANGES LOCATED ON BOTH ENDS. THE BEARINGS ARE SECURED IN THE SHEET METAL PLATE ON BOTH SIDES AFTER INSTALLATION. THE CLIP BEARINGS ARE SLIT AT AN ANGLE SO INSTALLATION OF THE BEARINGS IS POSSIBLE FROM ONE SIDE. AFTER INSTALLATION THE BEARING OPENS AND FORMS A LINING FOR THE BORE HOLE IN THE METAL PLATE. THE SHAFT PREVENTS THE CLIP BEARING FROM DETACHING FROM THE HOUSING. EVEN DURING AXIAL MOVEMENT THE BEARING REMAINS SECURED IN THE HOUSING. IN ADDITION THE LATERAL SLIT CAN COMPENSATE FOR BEARING EXPANSIONS DUE TO TEMPERATURE OR MOISTURE. DURING EXPANSION THE SLIT WIDTH DECREASES AND CHANGES SO THE BEARING CLEARANCE IS MINIMIZED. THE FLANGE DIAMETER ON THE SMALLER SIDE IS MADE TO ENSURE THAT HOUSINGS WITH LARGER TOLERANCES CAN BE PROPERLY SECURED. UL STYLE""MARGIN-TOP0PX; PADDING-TOP 5PX; PADDING-BOTTOM 5PX;"" SECURED WITH DOUBLE-FLANGE DESIGN CUSTOM DIMENSIONS ARE POSSIBLE LIGHTWEIGHT MAINTENANCE-FREE AND SELF-LUBRICATING GOOD WEAR RESISTANCE SMOOTH OPERATION SUITABLE FOR BOTH ROTATIONAL AND LINEAR MOVEMENTS EXPANSION POSSIBLE THROUGH SLIT DESIGN FOR SHEET METAL THICKNESSES OF .040-.135 INCHES (2MM 3MM AND 4MM) MATERIAL IGLIDE; M250
Priced: Each
Minimum for Order: 1
Manufacturer Dropship Typical Leadtime: 1.0