Johnson Controls Damper Actuator - M9116-GGA-2
FEATURES UL STYLEMARGIN-TOP0PX; PADDING-TOP 5PX; PADDING-BOTTOM 5PX; SIMPLE DIRECT COUPLING REDUCES INSTALLATION AND COMMISSIONING TIME WHILE IMPROVING RELIABILITY BY ELIMINATING DAMPER LINKAGES ROBUST 140 LB-IN (16 NM) TORQUE RATING ROTATION RANGE 0 TO 90° IN 5° INCREMENTS MECHANICALLY LIMITED TO 93° FITS 3/8 TO 3/4 (10 TO 20 MM) ROUND SHAFT 3/8 TO 5/8 (10 TO 16 MM) SQUARE SHAFT; 1 (25.4 MM) DIAMETER JACKSHAFT WITH M9000-154 ADAPTER ON-OFF FLOATING AND PROPORTIONAL CONTROL INPUTS MEET THE NEEDS OF MOST APPLICATIONS OUTPUT POSITION FEEDBACK PROVIDES SIMPLE CLOSED-LOOP CONTROL WITH ACCURATE POSITION SENSING MASTER/SLAVE OPERATION ALLOWS SYNCHRONIZED CONTROL FOR TWO ACTUATORS STACKED FOR TANDEM APPLICATIONS - DOUBLES RATED TORQUE OUTPUT ELECTRONIC STALL DETECTION ENSURES HIGHER RELIABILITY BY DEACTIVATING THE ACTUATOR MOTOR WHEN A STALL CONDITION IS DETECTED JUMPER SELECTABLE DC 0(2).10 V OR DC0(4).20 MA PROPORTIONAL CONTROL ZERO AND SPAN ADJUSTMENT (HGX MODELS) ALLOWS SEQUENTIAL OPERATION OF DAMPERS FROM A SINGLE INPUT SIGNAL OF DC 0(2).10 V DC 0(4).20 V OR DC 0(4).20 MA JUMPER-SELECTABLE ROTATION DIRECTION AND MANUAL GEAR RELEASE SIMPLIFY INSTALLATION SETUP AND FIELD ADJUSTMENTS 2-SPDT OPTIONAL AUXILIARY SWITCHES 1/2 NPT THREADED HOUSING PROVIDES EASY CONNECTION FOR ELECTRICAL FITTINGS MANUAL GEAR RELEASE SIMPLIFIES DAMPER /VALVE SETUP AND COMMISSIONING -4 TO 122°F (-20 TO 50°C) AMBIENT TEMPERATURE RANGE RATED FOR 60000 FULL STROKE CYCLES UL LISTED CSA CERTIFIED CE MARK
Priced: Each
Minimum for Order: 1
Manufacturer Dropship Typical Leadtime: 4.0