Leeson M1125218.00 1/8 HP 31 RPM 12VDC TENV P300 581 Ratio 220 In-Lbs
DC GEARMOTOR WITH PARALLEL SHAFT. 1/8HP 31 RPM GEAR RATIO 58 TO 1 OVERHUNG LOAD 327 POUNDS 220 LB. IN. FULL LOAD TORQUE TOTALLY-ENCLOSED NON-VENTILATED (TENV) ENCLOSURE 30 FRAME 12V NAME PLATE AMPS 10.6.PUNIT IS TOTALLY ENCLOSED PERMANENT MAGNET DC GEARMOTOR PERFORMANCE MATCHED FOR CONTINUOUS DUTY. FEATURES PRECISION MACHINED IN-LINE STEEL GEARS WITH A FIRST STAGE STEEL HELICAL GEAR FOLLOWED BY SPUR-TYPE GEARS. LUBRICATION IS PERMANENT SEMI-FLUID GREASE REDUCING POSSIBILITY OF LEAKAGE. OUTPUT SHAFTS HAVE NEEDLE BEARINGS FOR HIGH LOAD CAPACITIES. SHAFTS ARE HARDENED STEEL. CONDUIT BOX NOT INCLUDED WITH MOTOR. DESIGNED FOR MOUNTING AT ANY ANGLE BUT SHAFT UP WITH MOTOR BELOW SHOULD BE AVOIDED TO PREVENT LEAKAGE OF LUBRICANT INTO THE MOTOR SHOULD THE MOTOR'S SHAFT SEAL FAIL. OVERHUNG LOAD CAPACITIES SHOWN ARE AT CENTER OF OUTPUT SHAFT. THE MOTOR'S STALL TORQUE EXCEEDS RECOMMENDED FULL LOAD TORQUES. A CURRENT LIMITING DEVICE SUCH AS AN SCR CONTROL SHOULD BE USED TO PREVENT DAMAGE. MODEL 300 GEARMOTORS HAVE THE SAME MOUNTING DIMENSIONS AS BISON'S 300 AND MANY DAYTON GEARMOTORS/P
Priced: Each
Minimum for Order: 1
Manufacturer Dropship Typical Leadtime: 7.0