Kukko 3-Jaw Self Centering Puller 8.5 Ton Capacity 7/8"" To 6-3/8"" Open 6-3/8"" Reach
FOR REMOVING BEARINGS GEARS DISCS ETC. UL STYLE""MARGIN-TOP0PX; PADDING-TOP 5PX; PADDING-BOTTOM 5PX;"" SPINDLE HEAD BAND PREVENTS THE WRENCH FROM SLIPPING OFF. ALMOST ALL COMPONENTS AVAILABLE AS REPLACEMENT PARTS TIME-SAVING ORDER PROCESS THANKS TO NUMBERING SYSTEM. STANDARD PULLING HOOK. AUTOMATIC SELF-CENTERING PULLING HOOKS. THE THREE-ARM DESIGN ENSURES THAT THE LOAD IS DISTRIBUTED EVENLY AND THAT THE PART TO BE REMOVED IS HELD SECURELY. OPTIMAL ADJUSTMENT OF THE SPINDLE TO THE SHAFT WITH 2-SIDED SPINDLE TIP (BALL AND TIP). MECHANICAL PRESSURE SCREW. MILLED THREAD TREATED WITH SPECIAL COATING. THE PULLING HOOKS SLIDING PARTS MUST ALWAYS SIT STABLY AND FULLY ON THE CROSS-BEAM. IF SEVERAL PARTS HAVE TO BE REMOVED ALWAYS FOLLOW A STEP-BY-STEP PROCESS. DO NOT REMOVE SEVERAL PARTS AT THE SAME TIME. THE PULLING HOOKS SUPPORT SURFACES MUST ALWAYS BE STRAIGHT AND SIT FULLY BENEATH THE PART TO BE REMOVED. DO NOT USE ANY ELECTRICAL OR PNEUMATIC SERVO SCREWDRIVERS OR HAMMER DRILLS. PROTECTIVE BLANKET REQUIRED. PROTECTIVE GOGGLES REQUIRED. UL STYLE""MARGIN-TOP0PX; PADDING-TOP 5PX; PADDING-BOTTOM 5PX;"" HEXAGON DRIVE (MALE) (METRIC) 19MM SPACE NEXT TO IT (METRIC) 32MM SPACE BELOW 1/2 "" SPACE BELOW (METRIC) 12MM DEPTH (METRIC) 160MM SPREAD (METRIC) 23 - 160MM MAXIMUM TORQUE (METRIC) 180NM MAXIMUM LOAD (METRIC) 8T SPACE NEXT TO IT 1 1/4 ""
Priced: Each
Minimum for Order: 1
Manufacturer Dropship Typical Leadtime: 3.0
Not Cancellable Not Returnable